NewPort Dry Deck
Decks That Last
At Competitive Pricing
Our OmegaStone deck coating will not rip, tear or leak.
The most durable deck coating available today.
BONUS… No Seams. Because it’s not vinyl.
Why Not Vinyl?
Our decks last! Its not uncommon to have to replace vinyl in under 10 years. Because of ripped seams or tears, as well as using incorrect cleaners or power washers.
OmegaStone – go ahead and use your favorite cleaner and any brush you want, it cleans so easily that you will not need to power wash.
OmegaStone provides a 100% seal under patio doors, stucco or any siding! We leave the existing waterproof membrane and coat over it. Note the skylight and the walls in the picture. There are NO seams, no glued on pieces, a perfect seal, 100% waterproofed for LIFE. Waterproofing is our #1 priority.
OmegaStone Decks Last
NewPort “DRY” Deck Inc has “DRY” in our name because keeping your home protected from moisture is everything. Our OmegaStone polyurethane waterproofing membrane becomes part of the plywood. You can’t grind off or tear off OmegaStone! This video shows how durable OmegaStone is. A vinyl deck would be destroyed in seconds.
Even if you don't want to know anything about polyurethanes, this is important!
We are in a rain forest. Our polyurethane is moisture cured! That means we add 25% water to our urethane and mix it quickly. The water is the catalyst (makes it harden) once the water is mixed in, we have about 10 minutes to trowel out the base coat or it will harden in the bucket and cannot be used. Our climate is a perfect fit for OmegaStone.
Step 1Remove the vinyl or existing membrane, do pocket repairs if needed. Grind the deck, prep the plywood joints. Tape all joints, let them dry for about 1 hour. Trowel on the polyurethane base coat. This must dry overnight.
Prepare the base coat, then apply the urethane colour coat and add the acrylic flakes onto the wet colour coat. The flakes give the surface a slip resistant texture. This needs to dry overnight.
Next we remove the excess flakes. Whatever has bonded to the colour coat is there to stay. We give the surface a light sanding to ensure that its textured but still smooth enough and easy to clean.
A second clear coat is applied if needed. This also needs to dry overnight. These steps are not always done in consecutive days, although we prefer to start and finish in the four days, weather is a factor and timing is important.